In Stock - Next Day Delivery When Ordered Before 12pm
- Replaces Factory Original
- Belt Runs From Motor To Bottom Wheel
- Supplied With Replacement Circlip
High quality poly v drive belt to replace the original belt running from the motor to the bottom wheel on Elektra Beckum BAS 250 bandsaws.
Instructions: Take the tension off and remove the blade. Using a pair of circlip pliers remove the circlip on the bottom wheel. There is nothing else holding the wheel in place, so it should simply slide off the shaft. Slacken the motor only which will remove tension from the belt. Replace the belt and retension by sliding the motor back into place. Do not over tension. Replace wheel, circlip and blade.
